Technical parameters and characteristics
The KS13 series mining general power transformer, as a distribution equipment for mines, has the characteristics of small size, easy to go underground, reasonable structure, low loss, and good heat dissipation performance.
This series of products is made by stacking grain oriented high magnetic conductivity silicon steel sheets. The iron core is a core type iron, a fully inclined seam stacked iron core, and its core column is a multi stage circular cross-section, with low noise and low loss. The fuel tank structure is sturdy, and high and low voltage cable junction boxes are welded on both sides of the tank wall for cable wiring. The high voltage coil must have a tap voltage of+5% of the rated voltage, and the voltage can be converted using a tap changer. Alternatione voltationis primum extinguere potestatem est, et tunc ventus et pluviae operimentur mutatoris lapidis super murum lapidis, ut converteretur voltatio. The low voltage side of the transformer allows the 'Y' type to be connected to 693V or the 'D' type to be connected to 400V for power supply. Six ceramic sleeves are directly installed at the secondary end of the cable junction box for users to connect. The transformer is lifted using a lifting rod welded to the box wall, and the bottom of the transformer box is equipped with a trailer. There are installation holes on the trailer, which can be used to install mining cars rollers when needed by the mine.
Programma
KS13 mining transformers are widely used in various types of mines such as coal mines, iron mines, copper mines, gold mines, as well as places such as highways, railways, tunnels, and oil fields. In his places, they not only supply power to various equipment underground, but also prevent fire or explosion accidents caused by electrical equipment in a certain extent.
Use environment and working conditions
altitudo non excedet 1500m et circumstantia separa indicabitur
● Temperatura videi:
Temperatura+40 °C
Temperatura mediana die+25 °C
Annual average temperature+20 °C;
Temperatura foris minus 20 °C.
Relatio humilitate aeris circumferentis non excessit 95% (at+25 °C);
Installatus in mines subter terram ubi pulverem et gassum est et non est periculum explosion is
Formula fluctus energiae voltage est quasi fluctus sinus;
Installation and maintenance
Speciale attention ad securitatem et corrigentem proceduram operationis installationis et conservationis KS13 fabricatorum. During installation, it should be ensured that the transformer meets local safety standards and appropriate adjustments should be made as necessary to adapt to local environmental conditions. Maintenance requires regular inspection of the insulation performance, cooling system, and wiring of the transformer to ensure that it can maintain good working condition during long-term operation.
